[csidmr] .rdt file memory map

[csidmr] .rdt file memory map
I have been writing the Zone Manager program and as a consequence had to re-created the memory map notes. I have now uploaded them to the yahoo.com user group [csidmr] files area. 
This is far from a complete document. Only parts of the memory map have been decoded. But it should prove a starting point for anyone wanting to investigate further. 
The format is valid for the original CS700 firmware and the MD380 firmware. It almost certainly is not correct for the CS700A or CS750. 
I am not able to answer questions on this document. If you don't understand it then you probably shouldn't be playing about with .rdt files. There is a risk of bricking your radio if you do.

Partial memory map of the contents of a .rdt file. Reverse engineered from MD380 but the CS700 is the same. (not CS700A or CS750).

CS700 .rdt file Memory Map

Contact lists for uploading to CS750 or other CSI radios

Contact lists for uploading to CS750 or other CSI radios

DMR-Marc updates the contact lists nightly, especially since they are the ones who generate the new users lists.

Here is a source, supposedly updated daily, with all DMR contacts sorted by nation and state.
http://www.foxhollow.ca/DMR/Contacts/ALL-DMR-Contacts.ZIP

Does the CS750 radio support 65k+ users contacts? The reason I am asking is that the CS750 CPS software crashes when I am trying to upload a large file. Has anyone tried to upload 8000+ contacts?

Some time in the future after a few more FW upgrades, this will then be possible.

CS750 has no roaming only Motorola has roaming

Here is a source, supposedly updated daily, with all DMR contacts sorted by nation and state.
http://www.foxhollow.ca/DMR/Contacts/ALL-DMR-Contacts.ZIP

The foxhollow server downloads & processes the nightly full database from the DMR-MARC website. If you know of someone that got a new ID today, the foxhollow download ZIP file will have that new ID by tomorrow morning.

I currently create the files in CS700/MD380 CSV format as well as CS750 XLSX format. If another type of file is needed, send me a message and I'll add it to the daily dumps.


Posted by: mark-yahoo@foxhollow.ca

[CS750DMR] 1.00.34 Firmware

Date: June 27, 2015 at 11:36:51 AM ED
[CS750DMR] 1.00.34 Firmware

Based on feedback I would recommend against using the untested version on our website. However we got two more versions and the last version (or was it the one before that) has DTMF generation from the Keypad (about time). We will release it sometime this week after we test it. Within the next two weeks we will release a version with 2000 Channels and 65536 contacts. For most people the untested version on our website worked fine but not everyone.

I am planning on releasing the version with keypad programming at the end of July and a version with user programmable APPS about Mid August.



Jerry Wanger KK6LFS

[CS750DMR] CS750 DTMF not operational.

 [CS750DMR] CS750 DTMF not operational

Sending DTMF is an Analog Function. Because of the AMBE II Vocoder, it might not be possible to get good DTMF within a Digital format. In some protocols, they send DTMF as a special digital command and the terminating device converts it back to DTMF.

We hope to have the DTMF working in the near future. I will ask the firmware developers again to get that working.

Jerry Wanger KK6LFS


Firmware CS750 scrambled display

New Firmware CS750 scrambled display

Tried to load the new bootloader (v2.00) then the new firmware (1.0.32 then 34) on my 750.  I now have a scrambled display.  Tried to reload which all looks good for loading…but display is still scrambled.
Anyone else seeing this….or an Idea how to get the radio back to displaying correctly?
I found the FONTS file on the CSI website….Loaded that file and all is good now.

Directions :: 

If trying to update firmware to versions 1.00.32 or 1.00.34 follow the instructions in the June 19 note?
*** NOTES:  Upgrades are included for both CS750 and CS800 

SELECT CAREFULLY:   If your CS750 is not on V26, you will need to load the V26 Font data before this update.  Then: Both CS750 and CS800 require new Bootloader to be installed before the firmware.   Bootloader and Upgrade files are both loaded to radio using FlashBurn program.   

Mic Gain on CS750


Mic Gain on CS750
You can use Echotest to listen to your own signal and compare it to others, or ask folks on the air what they think. I've got mine set at 16, and friends say that's about right.

how to test ?

update #12 - Connect Systems Inc

Greetings to the DMR Groups.

I'll begin with a thank you for all of your reports and comments regarding your experiences with the CS750 and CS800. I will also apologize for not posting more often, but things are very busy at CSI right now.

Good news first then - as some of you have already noticed, we posted the Data Extraction tool for the CS700 .rdt files, written for us by Tom Wheeler who also created the Contact Manager software. This tool will extract your Contacts and Channels information from the .rdt file and export them into an Excel spreadsheet. Yes, unfortunately Excel is still required at this time. From there, they can be imported into the CPS. Due to the nature of interdependencies in the CPS, we cannot export or import               Zone, Scan, or Receive Group
information. We are aware that this still leaves quite a bit of additional programming, but the heavy lifting of large contacts lists and extensive channel information is handled by the new tool. One more important note - import your Contacts FIRST and then your Channels, otherwise the TX groups will not populate correctly.

On to the bugs. Please continue to post any issues that you find with our radios, even if it is listed below. I read every post placed here even though I cannot respond to most of them. We are chasing down some elusive causes for these problems and you never know who might post that one small bit of information regarding a setup or experience that provides a critical clue. This is by no means a complete list, but these are the priority items now for both the CS750 and the CS800.

New version 1.25 of the CPS for the old CS700

I just posted version 1.25 of the CPS to match the firmware I put on the website a few days ago. Have not had time to put this on the Connect Systems website or even test it.

Jerry Wanger KK6LFS
jwanger@pacbell.net



CPS V1.25 download and installed on a Win 7 PC.  Reads existing codeplug and writes to radio OK.  Nuisance Delete is now an option in the Button Definitions drop-down.

Now waiting for a busy channel to see if Nuisance Delete works!

CS750 Programming crashes

My programming software crashes and says cant open or cant create xlsx files or something like that when I try to import contacts from a 700 codeplug.  I was following directions from the file conversion utility CS700 Data Exporter.

Any others have same issue?  I thought it was discussed here earlier.  I just got on the list recently.

Your problem is not having Excel installed.  I use Open Office.  I ordered a copy of Office96 off EBay.

I use LibreOffice which is free, and import works great.

Very quick CS750 DMR rx demo

CS750 has no roaming only Motorola has roaming




Some clarifications on CSI software

Just a quick response to some of the questions -

The new firmware (V2.19) and CPS (V1.25) for the CS700 offer corrected DTMF signaling (I believe the * key is working correctly now) and Nuisance Channel Delete during scanning mode. Microphone gain is not included in this firmware, which is being provided by the previous consulting group.

The Data Extractor software pulls out Contacts and Channels data. The older Contact Manager software written by Tom Wheeler is still available on his website, but the extracted data will need adjustments before it can be imported into the CS750 CPS. It will also only get the contacts data.

The CPS currently requires Microsoft Excel, 2003 or later. We are aware

Exporting CS700 .rdt to Excel .csv files for Import to CS750

PC Program for CS750/CS751
Version 3.03.20

Extracts data from CS700 .rdt files and saves to Excel files.

I used this application and was able to import and use my old CS700 .rdt contact data and channel data into my CS750 radios. However, it does not copy or set up any Zone Aliases or Scan Aliases (for lack of a better word ... files). And, it is important to match Contact Names from DMR Services to the Zone Aliases. What happened to the RX Group List? That seems to work within the Zone Aliases ?

I spent about 8 hours working to export the CS700 .rdt and then to import it into the CS750, and re-make all of the Zones, Scan Lists. A lot of it works but there's a lot I have not tested yet.

CS750 front face programable

CS750 I assumed it was front face programable? im just curious if i missed a step in the updates? thank you for any help on this topic would be helpfull..

Answer::

If you look carefully at our web site you will notice that is planned for the near future with a simple firmware upgrade you could do yourself for free.

The first upgrade will be expanded channels and expanded contacts.
The second or third upgrade will be front panel programming and visually impaired support.
The next upgrade will be user defined Apps
After that it is dependent on what the amateur community wants.

Jerry Wanger KK6LFS

750 periodically reboots.

I just purchased a 750 and periodically it just reboots. Sometimes it will reboot once, and other times it will keep going until i turn the power switch off.

Has anyone else has this happen ?

Answer :
Make sure you have the latest firmware. If you do, try to figure out what is causing it to reboot so we can reproduce it and tell the manufacturer how to duplicate what you are seeing so they can fix the problem. There is nothing worse than telling a programmer it does not work but you cannot show it too them. We are getting some specialized test equipment that will be able to hopefully figure these problems out in a way that can be duplicated.
Jerry Wanger KK6LFS